|
E3,
2/34 Mbps PDH Multiplexer
Product DescriptionProduct Brochure
Technical Specifications
|
Orion Telecom Networks Inc. offers VCL
E3-2/34Mbps, PDH Multiplexer is a third order skip multiplexer /
demultiplexer unit, based on PDH (Plesiochronous Digital Hierarchy)
technology. It multiplexes sixteen 2.048Mbps (hereafter referred to as
2Mbps) E1 tributaries into |
 |
| a single
34.368Mbps (hereafter referred to as 34Mbps) E3 tributary. The
multiplexer / demultiplexer also does the reverse processing i.e.
demultiplexing a received 34Mbps stream into sixteen 2Mbps E1
tributaries. |
VCL-2/34 Mbps Multiplexer system consists of
two VCL-2/34 Mbps terminals one each at the local and remote ends, connected through a
34Mbps stream, providing end to end services for sixteen, 2Mbps streams. Both local and
remote terminals can be monitored and controlled by a Network Management System (NMS)
connected to the local terminal.
-
FEATURES
- Single - card implementation
- Plug and Play Multiplexer
- Modular 2Mbps transmission units
- Standard CCITT (ITU-T) compliant interfaces
- Capable of synchronizing on any of the 34368 kHz clock sources -
internal, external or extracted
- Remote and local terminal monitoring and control by Network
Management System
- Optional TCP/IP Remote Access for monitoring alarms
and management
|
-
HIGHLIGHTS
- Extensive alarms and status indication facility
- Service bit monitoring and insertion
- Operates on nominal -48V DC input
- Distributed on-board power supply
- Microprocessor controlled with powerful diagnostic facilities for
both remote and local systems
- Local and remote loopback facility for 34Mbps stream
- Stored program controlled
- Highly reliable and compact
|
EXTERNAL INTERFACES
VCL-E3 unit provides the following
interfaces to the external world:
- 16, primary rate, 2Mbps, 120 W balanced interface
- 1, third order, 34Mbps, 75 W unbalanced interface
- -48V input for VCL-2/34 on-board power supply
- RS232 interface for connection to Network Management System,
used for configuration and monitoring of the VCL-2/34 multiplexer.
- 2 alarm extensions for visual and audible alarms.
The front panel LEDs
provide the following indications:
L1 - Negative 48V input present
L2- Positive 5V present
L3- Negative 5V present
L4- Processor healthy
L5- Processor failed
L6- Loss of signal at 34Mbps |
L7- Loss of frame alignment at 34Mbps
L8- Remote Alarm at 34Mbps
L9- AIS at 34Mbps
L10- Excessive Error Rate at 34Mbps
L11- Loss of signal at 2Mbps
L12- Prompt Maintenance Alarm |
PROGRAMMING AND MONITORING
VCL-2/34 Mbps Multiplexer offers programming
via an RS232 port for control and monitoring of the terminals. Both local and remote
multiplexer can be monitored and controlled using a PC loaded with the NMS software
connected to the local terminal.
-
Programming
Features
- Setting master / slave identity for each VCL-2/34Mbps Multiplexer
system
- Setting local / remote identity for each VCL -2/34Mbps Multiplexer
system
- Specifying the priority sequence for clock selection.
- Setting local or remote loopbacks on 2Mbps or 34Mbps
- Enabling or disabling 2Mbps channels
- Initiating self tests
- Alarm acknowledgment option
|
-
Status Monitoring
- Presence or absence of remote terminal
- Priority sequence of clock selection and current clock on which the
system is working
- Status of alarm
- Presence or absence of loop-back on 34Mbps and 2Mbps streams
- Enabled / disabled status of 2Mbps channels
- Master / Slave status
- Monitoring healthy / unhealthy state of microcontroller and 2Mbps
line interface units
- Previous configuration file
|
Alarm Status Monitoring
- Loss of incoming signal at all 2Mbps ports
- Loss of incoming signal at 34Mbps port
- Loss of frame alignment at 34Mbps
- Remote Alarm at 34Mbps
- AIS at 34Mbps
- Excessive Error Rate at 34Mbps
- Status of audible alarm
In addition to the above monitoring facilities, VCL-2/34Mbps
Multiplexer is provided with LEDs on the front panel of the multiplexer, which indicate
various fault conditions.
- Monitoring VCL-E3 via LED
Indications
- Loss of signal at 2Mbps
- Loss of signal at 34Mbps
- Loss of frame alignment at 34Mbps
- Remote Alarm at 34Mbps
- AIS at 34Mbps
|
- Excessive Error Rate at 34Mbps
- +5V failure
- -48V input failure
- Processor unhealthy alarm
- Prompt Maintenance alarm
|
Related Links:
Others Links
Technical specifications are subject to change
without notice.
All brand names and trademarks are the property of their respective owners.
|
|
|
Product Brochure
(PDF)
|
|
Technical Specifications |
|
E1 Voice-Data Drop-Insert Multiplexer with
FXO, FXS, E&M, RS232, V.35, Ethernet |
|
STM-1 SDH Add Drop Multiplexer with E1, T1,
E3, E4, DS3, STM-1e, STM-1o, 10/100 BaseT Ethernet |
|
PRI ISDN Q.931 Multiplexer with FXS Interface |
|
E3, 2/34 PDH Multiplexer
|
|
|
|
