VCL-MX, E1 Drop Insert Multiplexer
Product
Overview
Orion Telecom Networks Inc. offers E1 Multiplexer the VCL-MX, 2Mbps E1 voice
and data, drop-insert (add-drop) multiplexer provides full range of voice
(POTS) and digital data services to subscribers located at different locations,
requiring to interconnect and establish a voice and data network over
an E1 link. The VCL-MX is available in 6 versions, each
providing different features and voice / data interfaces.
The VCL-MX, E1, Drop-Insert Multiplexer provides voice
telephony and digital data services which may include:
The
Multiplexer may be used in Terminal or Drop-Insert configuration to
provide
- Toll Quality Voice services
- Interconnect LAN (Campus Network)
- Provide LAN-WAN Interconnectivity
- Provide Leased Lines on DSL for SOHO Applications
Voice Interfaces
- FXO
- FXS
- E&M (2 Wire and 4 Wire)
- FXS-FXS (Hot-line)
|
Data Interfaces
- RS232
- G.703 @ 64 Kbps, co-directional
- IDSL @ 128 Kbps
- V.35, n X 64 Kbps
- V.36, n X 64 Kbps
- X.21, n X 64 Kbps
- RS530, n X 64 Kbps
- G.SHDSL, n X 64 Kbps
- 10BaseT - Ethernet Bridge
- 10BaseT - Router
|
The VCL-MX E1 Interface operates at a primary rate of 2.048
MBits/Sec and provides a host of features including, channel drop and insert facility over
a network of VCL-MX, E1 Multiplexers, for voice and data applications.
The VCL-MX has an effective, CLI (text) based "Network
Management System", which may be used for configuring the system, subsequent remote
monitoring and management of the inter-connected systems in the network. Both Inband and
Out-Of-Band configuration and monitoring options are available. An extensive set of
alarms, for easy maintenance are provided in the system.
VCL-MX
Version # 1 - Voice
and Data Drop-Insert Multiplexer without In-band management interface.
Available Interfaces
Voice Interfaces: FXO / FXS / E&M
Data Interfaces: RS232 / iDSL / G.703
VCL-MX Version 2-STD (Standard version)
2Mbps ~ 30 Channel E1 Voice and Data, Drop-Insert Multiplexer
provides full range of POTS (voice) and digital data services to
subscribers located at different locations, requiring to
interconnect and establish a voice and data network over an E1 link.
VCL-MX Version 2-DLX (Deluxe version) is also
available with 4 E1, 30 channel Voice and Data, Drop-Insert
Multiplexer - SNMP V2 Monitoring with NMS for monitoring
multiple nodes over an IP Network, from a central location.
VCL-MX Version #
3-STD (Standard Version) - Voice and Data Drop-Insert
Multiplexer with In-band Management Interface and “n” X 64 Kbps data options:
Available Interfaces
Voice Interfaces: FXO / FXS / E&M
Data Interfaces: RS232 / iDSL / G.703
nX64 Interfaces: V.35 / V.36 / X.21 / RS530 / G.SHDSL / 10BaseT
/ Fractional E1
VCL-MX Version 3-DLX
(Deluxe version)
is also available with SNMP
V2 Monitoring with NMS for monitoring
multiple nodes over an IP Network, from a central location with SNMP
features.
VCL-MX
Version # 4 - Voice and Data Drop-Insert
Multiplexer with In-band Management Interface and “n” X 64 Kbps data options
(75 Ohms unbalance / 120 Ohms balance E1 Impedance)
Available Interfaces
Voice Interfaces: FXO / FXS / E&M
Data Interfaces: RS232 / iDSL / G.703
nX64 Interfaces: V.35 / V.36 / X.21 / RS530 / G.SHDSL / 10BaseT / Fractional E1
VCL-MX
Version # 5 12 x E1 non-blocking cross-connect at 64Kbps
(DS-0) level with FXO, FXS, E&M (2 Wire/4 Wire), FXS-FXS (Hot-line), V.11,
RS232, G.703 @ 64 Kbps, Co-Directional, Magneto,
Conference interface,
V.35, V.36, X.21, RS530, 10BaseT - Ethernet interfaces with Remote Management. Available
with redundant 1+1 power supply. Used in a Point-to-Point, Point-to-Multi point, Add-Drop
(drop-insert), Tree and Star topology. Available with telnet and SNMP V2.
Available
Interfaces
Voice Interfaces: FXO, FXS, E&M, Hotline,
Magneto, Conference interfaces
Data Interfaces: V.11, RS232, iDSL / G.703 / n x 64 Interfaces: V.35 / V.36 / X.21 / RS530 / 10BaseT / Fractional E1, Analog I/O Card, Digital I/O Card, Universal Data Interface Card.
VCL-MX, Version 6
- VCL-MX Version 6 - E1 Multiplexer may be used for inter-connecting legacy
networks, provisioning and managing bandwidth on a E1 channelized level as
well as 64Kbps, DS-0 time-slot level and as a digital-access cross-connect
equipment. Due to the changing traffic patterns, there is a need to
support multiple services from the same equipment like integrated data
transport, better network management etc. This necessitated evolution to
next generation E1 Multiplexer. Redundant power supply options make it an
ideal solution for network service providers seeking to integrate and
provide legacy and the next generation services from a single platform.
Features
- Voice and Digital Data services.
- Any combination ("mix-n-match") of Voice and Digital
Data services deployed from a single VCL-MX "Smart Shelf".
- Drop and Insert (Add-Drop) applications.
- Digital Data option may be used for internet access or video
conferencing application.
- Wireless applications including Cellular Networks.
- Digital Microwave Radio.
- SCADA applications.
- Frame Relay circuit termination.
- Powerful Network Management System for monitoring and network
control.
- Compliance with all relevant ITU-T (CCITT) recommendations.
- 3U high, compact construction.
Highlights
- Field upgradable to provide voice, data or both services.
- Flexibility on use of transmission medium - copper, fiber, or
wireless.
- Choice of Interfaces for Data Applications.
- RS232, PC Interface "Network Control And Management
Software".
- In-band system configuration and management interface.
- Out-of-band system configuration and management interface
through 10BaseT Terminal (Optional)
- Channel assignment independent of slot position in the
subrack.
- Extensive set of alarms.
- User Selectable Internal or Loop-Timed clock options
Transmission
Mediums
The VCL-MX offers an excellent flexibility on the choice of
transmission medium over which it may be deployed. The transmission medium can be either
of the following:
- Copper
- Optical Fiber
- Wireless
Application
of VCL-MX
- Voice (POTS), digital data, or real-time video conferencing
services (V.35, V.36, X.21, RS530, 10BaseT Router, 10 BaseT Ethernet Bridge) high-speed
digital data interface options allows point-to-point network solutions for providing a
video conferencing channel of up to 1984 Kbps).
- Junction Mux - for digital interconnection of analog
exchanges.
- Drop & Insert applications.
- Wireless network applications.
- High-speed data ports for digital communication links
providing Leased Lines access to Internet Service Provider (ISPs) with speeds ranging from
64Kbps up to 1984 Kbps digital data interface options.
- Micro-Cellular infrastructure applications for providing
cell-switch connectivity.
- Wide area networking.
- Internet Access over POTS lines - All POTS interfaces operate
@ 64Kbps and support V.34 (33.6Kbps) dial-up modems.
User Configurable Interface Cards
Voice Interfaces
- POTS service from a Central Office Switch. (FXO & FXS)
- Hot Line (FXS-FXS).
- 2 Wire and 4 Wire, E&M applications.
- 15W, sine-wave, 75VRMS / 86VRMS 20 Hz / 25 Hz Ringer for FXS
and Hot-line (FXS-FXS) interfaces.
|
Data Interfaces
- RS232
- G.703 @ 64 Kbps, co-directional
- iDSL @ 128 Kbps
- V.35, n X 64 Kbps
- V.36, n X 64 Kbps
- X.21, n X 64 Kbps
- RS530, n X 64 Kbps
- G.SHDSL, n X 64 Kbps
- 10BaseT - Ethernet Bridge
- 10BaseT - Router
- Fractional E1 (Framed and un-Framed)
|
Related Links
Others Links
Technical specifications are subject to
change without notice.
All brand names and trademarks are the property of their respective
owners. |
