VCL-MX,
Version 3-STD (Standard Version)
E1
Drop Insert Multiplexer
Product Overview
Orion Telecom Networks Inc. offers VCL-MX
Version 3-STD (Standard Version),
2Mbps E1 voice and data, drop-insert (add-drop) multiplexer provides full
range of voice (POTS) and digital data services to subscribers located
at different locations, requiring to interconnect and establish a voice
and data network over an E1 link. The VCL-MX is a simple, yet powerful E1 Channel
Bank for connecting and integrating analog communication equipment
with digital E1 interface.
The VCL-MX, E1, Drop-Insert Multiplexer provides voice
telephony and digital data services which may include:
The
Multiplexer may be used in Terminal or Drop-Insert configuration to provide:
- Toll Quality Voice services
- Interconnect LAN (Campus Network)
- Interconnect Computer Terminals
- Provide LAN-WAN Interconnectivity
- Provide Leased Lines on DSL for SOHO Applications
Voice
Interfaces
- FXO
- FXS
- E&M (2 Wire and 4 Wire)
- FXS-FXS (Hot-line)
|
Data Interfaces
- RS232
- G.703 @ 64 Kbps, co-directional
- iDSL
@ 128 Kbps
- V.35, n X 64 Kbps
- V.36, n X 64 Kbps
- X.21, n X 64 Kbps
- RS530, n X 64 Kbps
- G.SHDSL, n X 64 Kbps
- 10BaseT - Ethernet Bridge
- Analog I/O Card
- Digital I/O Card
- Universal Data
Interface Card (User Configurable Data Interface)
- Fractional E1
|
Digital I/O Card - It provides 8
digital I/Os which may be used to either extend Digital I/O’s (logic
high/low) signals between any two E1 Multiplexers or operate switches
remotely (using logic high/low) signals between any two multiplexers.
Drivers/Sense Logic operates using External Voltage and Ground
references).
Analog I/O Card - It provides 8
Analog I/Os which may be used to extend either Dry Relay Contacts (Relay
Normally-Open or Relay Normally-Close) or operate switches remotely
(using 2A Dry Relay Contacts) between any two Multiplexers using a 64
Kbps time-slot. The Dry Relay Contacts are rated at maximum 2 Amps, 30
Volts DC.
VCL-MX Version 3-DLX
(Deluxe version)
(PDF)
is also available with SNMP
V2 Monitoring with NMS for monitoring
multiple nodes over an IP Network, from a central location.with SNMP
features. The
VCL-MX E1 Interface operates at a primary rate of 2.048 MBits/Sec
and provides a host of features Including, channel drop and insert
facility over a network of VCL-MX, E1 Multiplexers, for voice and
data applications.
The VCL-MX has an effective, CLI
(text) and GUI (Graphical User Interface) based "Network Management System",
which may be used for configuring the system, subsequent remote monitoring
and management of the inter-connected systems in the network. An extensive
set of alarms, for easy maintenance are provided in the system.
Voice and Data Drop-Insert Multiplexer without In-band
Management Interface:
Available
Interfaces
Voice Interfaces: FXO / FXS / E&M
Data Interfaces: RS232 / iDSL / G.703
/ V.35 / V.36 / X.21 / RS530 / 10BaseT
/ Fractional E1 / Analog I/O Card, Digital I/O Card
VCL-MX Version
3
Front View
System
Composition
| Core
System Composition |
Description |
Part
No. |
| 19-Inch
Shelf 3U high |
19-
Inch Shelf and Backplane |
VCL-MX-003 |
| Slot
1 |
Power
Supply Card |
VCL-MX-010 |
| Slot
2 |
Ringer
Card |
VCL-MX-040 |
| Slot
3 to 12 |
10
User Configurable voice & data interface(s) |
As
per user requirement |
| Slot
13 to 16 |
"n" x 64kbps Interface
Cards |
As
per user requirement |
| Slot
17 |
NMS / Telnet Management Card |
VCL-MX-NMS |
| Slot
18 |
Control Card 1 with
In-band Management |
VCL-MX-015-3 |
Rear
View
Related Links
Others Links
Technical specifications are subject to
change without notice.
All brand names and trademarks are the property of their respective
owners. |
