Home  |  Products  |  About Us  |  What's New  |  Contact Us  |  Press   |  E-mail

VCL-MX-XW, Industrial Grade

Ethernet Switch 

IEC 61850-3 (Sub-Station Hardened)

Product Overview

Orion Telecom Networks Inc. offers VCL-MX-XW, Industrial Grade Ethernet, IEC 61850-3 complied Sub-Station Hardened Switch, is a flexible Ethernet Switch that is packaged in a 1U high, 19-inch rack-mountable shelf that can be installed in harsh environments. It requires no external fans or forced air cooling.

This IEC 61850-3 complied switch offers a wide choice of 1+1 redundant power supply options which include 24V DC, -48V DC, 110-125V DC, 110VAC and 240V AC.

VCL-MX-XW Industrial Grade Ethernet Switch offers 8, Fast Ethernet (FE) User Ports which can be selected by the user as 10/100BaseT Electrical or 100BaseFX Optical. Additionally, it has 2, Gigabit Ethernet Network Ports which can be configured by the user as 10/100/1000BaseT Electrical or 1000BaseSX or 1000BaseLX Optical. It is a fully managed Switch that offers 1+1 Ethernet link redundancy and QoS by implementing IEEE802.1p, 802.1Q and Differentiated Services (Diffserv) and packet priority classification protocols for traffic management and optimization.

VCL-MX-XW, Industrial Grade Ethernet Switch - Product Flyer (PDF)

  • 10 Port Sub-Station Hardened Switch

  • User Side: 8 Fast Ethernet Ports: 8 x 10BaseT / 100BaseT / 100BaseFX full-duplex User Ethernet ports. All 8 User-side Ports - are individually configurable as either10/110BaseT Electrical or 100BaseFX Optical ports, as required.

  • Uplink / Network Side: 2 Gigabit Ethernet Ports: 1000BaseSX/LX Optical or10/100/1000BaseT Electrical. Both Uplink / Network Ports - user configurable to either 1000Base Optical or 10/100/1000BaseT Electrical.

Highlights

  • Sub-Station Hardened Managed Switch designed to operate in rugged environments even in extreme (-400C to +650C) temperature conditions.

  • Does not require any external fans or forced air cooling.

  • Uplink / Network Ports: 2 User Selectable Gigabit Ethernet Fiber / Copper ports.

  • Downlink / User Side Ports: 8 Fiber / 8 Copper Fast Ethernet ports - the user may select any 8 ports - 10Mbps/100Mbps BaseT or 100BaseFX in any configuration.

Power Supply Options

  • Dual Redundant (AC + DC).

  • 1+1 DC (-24V) power (18 to 40V DC).

  • 1+1 DC (-48V) power (40 to 72V DC).

  • 1+1 DC 110-125V power (90 to 135V DC).

  • 1+1 AC power (100 to 240V AC, 50/60 Hz).

  • AC or DC.

  • EMI/EMC compliant.

External Alarms

  • Dry Contact Relay.

Key Features

  • Sub-Station Hardened Design

  • IEC 61850-3 and IEEE 1613 complied

  • -400C to +650C operating temperature

  • 1+1 redundant power supply

  • Wide DC and AC voltage operating range

    • 24V DC to 72V DC

    • 90V DC to 250V DC

    • 85V AC to 240V AC.

Ethernet Port Features

  • 8 x 10BaseT / 100BaseT / 100BaseFX full-duplex User Ethernet ports.

  • All 8 User-side Ports - user configurable to either 10/110BaseT Electrical or 100BaseFX Optical ports.

  • All 8 User-side Copper Ethernet Ports - Auto-negotiation, auto-MDI/MDIX.

  • 2 Uplink / Network Ports (1000Base Optical) full-duplex Gigabit Ethernet ports.

  • 2 Uplink / Network Ports (10/100/1000BaseT) full-duplex Ethernet ports.

  • Ethernet packet forwarding at wire-speed, non-blocking.

  • User programmable bandwidth rate control on a per port basis (Ingress / Egress Rate Limiting).

  • Flow Control.

  • Ethernet packet filter and prioritization on each of the ports (port based priority).

  • Reliable Store-and-Forward operation with data integrity checking.

  • Support s up to 1632 Byte Frames.

  • 1+1 Ethernet Link Protection.

  • Supports VLAN and IEEE802.1Q VLAN tagging for Management Port.

  • IEEE802.1p, 802.1Q and Differential Services (DS) QoS

  • NTP Client for automatic time updation.

Management Features

  • RS232 serial console port.

  • USB console port.

  • In-band Ethernet (Telnet, SSH and TFTP) management.

  • Reset Switch.

  • Power LEDs.

  • Real Time Clock (RTC).

  • Automatic updating of RTC time standalone card - RTC shall update itself at user defined intervals from an NTP Server the user shall define the IP address of the NTP server).

  • Supports command line interface with predictive command completion.

  • Supports IEEE802.1x security.

  • Password Protection.

  • SNMP V2 Traps.

Related Links:

Others Links

Technical specifications are subject to change without notice.
All brand names and trademarks are the property of their respective owners.

 

VCL-MX-XW, Industrial Grade Ethernet Switch - Data Sheet (PDF)

10 Port Sub-Station Hardened Switch

IEC 61850-3 compliance

1+1 Redundant Power Supply options

Key Features

Ethernet Port Features

Management Features

TDM over IP

GSM Gateway / GSM Channel Banks

Echo Cancellers and Voice Quality Enhancement

Digital Access Cross Connect Switch (DACS)

Groomers (Hi-Z Non-Instrusive Monitoring)

STM SDH Multiplexer
Multiplexers and Channel Banks
Optical Transmission
E1, T1, E3, DS3, Ethernet Converters
APS (1+1) Automatic
Protection Switch
::   Application Diagram  ::
 
Home    |   What's New   |   About Us   |   Contact Us   |   Products   |    Press   |   E-mail