16 x E1 Splitter
(100 Ohms) - What does it do?
The 16 x T1 Splitter (100 Ohms) "Splits" the T1 signal that it
receives between two T1 ports, by monitoring the same T1 signal on
two ports, simultaneously.
Application - Where is it used?
The 16 x T1 Splitter (100 Ohms) may be used in application that
require the T1 signal input to be simultaneously connected to active
terminal equipment, while at the same time connecting it to "shadow"
equipment such as call loggers, voice call recorders, data recorders
or any other such equipment that does not load the active T1 link in
any way and connects to the live T1 links non-intrusively.
Switch Settings for Splitter
All four DIP switches must be sent to ON position for
Connecting the T1 Main Link on Splitter
The RJ-45 Connectors in the Row Marked Row A and Row B
are used for patching the Data IN / Data OUT from the Main E1/T1
Connecting "Split" E1/T1 Link on the Splitter
The RJ-45 Connectors in the Row Marked MON provides the
Split mirror image of the MAIN E1/T1 link patched between the RJ-45
connectors on Row A and Row B.
16 x T1 Splitter (100 Ohms) Panel - Circuit Schematic
The normal (0 Ohms) resistive output is
provided on the Monitoring (MON) Port of the Splitter for connecting to
the call loggers, voice call recorders, data recorders or any other such
19 Inch. DIN Rack
||485 mm (with mounting
16 x T1, 100 Ohms Splitter
E1/T1, 120/100 Ohms RJ45 (F) Splitter Panel
19" Metal Case 2U High Rack
Mount Version with Hardware Set