|
|
Tenor
CMS Products |
Tenor CMS
240 Carrier MultiPath Switch
|
The Tenor Carrier MultiPath Switch gives CLECs,
ISPs and other telecommunications entrepreneurs an easy,
cost-effective way to deliver low-cost, high-quality voice
services over IP networks. Advanced features include both IP
Packet and TDM circuit switching, built-in multilingual IVR and
the ability to perform Billing and Least Cost Routing in
association with an external RADIUS based billing server.
Residing in your POP and connected to Tenor
units on customer premises via IP, the Tenor CMS provides a
complete VoIP solution with a MultiPath architecture that allows
you to use both your data network and the public switched
telephone network to provide voice service. By providing greater
assurance of call quality and reliability, this unique capability
makes VoIP services easier for you to sell to today’s risk-averse
customers, easier to customize for individual customer needs and
easier to scale as your business expands.
|
Part
Number |
Product
Description |
Model
Number |
|
501-0087-00 |
Tenor CMS 240 Carrier MultiPath
Switch Base System (a.c. power) Tenor CMS 19"
rack mounting 2 slot chassis with system controller and single a.c.
power supply. The base system does not include Line Interface
cards, an H.323 gatekeeper, PacketSaver packet multiplexing or
multiple IVR languages. These options must be ordered separately.
Power Requirements : 100 – 240 Volts
a.c., 50/60 Hz.
|
CMS240
Base System (a.c.) |
|
501-0088-00 |
Tenor CMS 240 Carrier MultiPath
Switch Base System (d.c. power) Tenor CMS 19"
rack mounting 2 slot chassis with system controller and single d.c.
power supply. The base system does not include Line Interface
cards, an H.323 gatekeeper, PacketSaver packet multiplexing or
multiple IVR languages. These options must be ordered separately.
Power Requirements : -48 Volts d.c.
|
CMS240
Base System (d.c.) |
|
|
TOP |
Tenor CMS 240 8/120 Bundled Systems (a.c. power)
|
Tenor CMS 240 8/120 Bundled Systems offer CLECs,
ISPs and other telecommunications entrepreneurs a fully equipped
"starter" system in a convenient bundled form.
The Tenor CMS 240 8/120 Bundled System consists
of the Tenor CMS 240 Base System and a single DS-1 Line Card which
is equipped with one DSP Resource Module. This combination will
support up to 8 T1/E1 spans and up to 120 simultaneous VoIP calls.
The Tenor CMS 240 8/120 PS Bundled System is
identically configured but also includes Quintum’s PacketSaver
packet multiplexing technology which significantly reduces the
amount of IP bandwidth required to support multiple VoIP calls
between two Tenor switches.
|
Part
Number |
Product
Description |
Model
Number |
|
501-0093-00 |
Tenor CMS 240 8/120 Bundled System (a.c.
powered) Consists of the Tenor CMS 240 Base
System, a DS-1 Line Interface Card and one DSP Resource Module.
This bundled system does not
include an H.323 gatekeeper,
PacketSaver packet multiplexing or multiple IVR languages. These
options must be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS240
8/120 Bundle (a.c.) |
|
501-0094-00 |
Tenor CMS 240 8/120 PS Bundled System
(a.c. powered) Consists of the Tenor CMS 240
Base System, a DS-1 Line Interface Card, one DSP Resource Module and
one PS-120 PacketSaver Option. This bundled system does not
include an H.323 gatekeeper or multiple IVR languages. These
options must be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS240
8/120 PS Bundle (a.c.) |
|
|
TOP |
Tenor CMS 240 8/240 Bundled Systems (a.c. power)
|
Tenor CMS 240 8/240 Bundled Systems offer CLECs,
ISPs and other telecommunications entrepreneurs a fully equipped
"starter" system in a convenient bundled form.
The Tenor CMS 240 8/240 Bundled System consists
of the Tenor CMS 240 Base System and a single DS-1 Line Card which
is equipped with two DSP Resource Modules. This combination will
support up to 8 T1/E1 spans and up to 240 simultaneous VoIP calls.
The Tenor CMS 240 8/240 PS Bundled System
is identically configured but also includes Quintum’s PacketSaver
packet multiplexing technology which significantly reduces the
amount of IP bandwidth required to support multiple VoIP calls
between two Tenor switches.
|
Part
Number |
Product
Description |
Model
Number |
|
501-0099-00 |
Tenor CMS 240 8/240 Bundled System (a.c.
powered) Consists of the Tenor CMS 240 Base System, a DS-1
Line Interface Card and two DSP Resource Modules. This bundled
system does not include
an H.323 gatekeeper, PacketSaver
packet multiplexing or multiple IVR languages. These options must
be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS240
8/240 Bundle (a.c.) |
|
501-0100-00 |
Tenor CMS 240 8/240 PS Bundled System
(a.c. powered) Consists of the Tenor CMS 240
Base System, a DS-1 Line Interface Card, two DSP Resource Modules
and two PS-120 PacketSaver Options. This bundled system does not
include an H.323 gatekeeper or multiple IVR languages.
These options must be ordered
separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS240
8/240 PS Bundle (a.c.) |
|
|
TOP |
Tenor CMS 960 Carrier MultiPath Switch
|
The Tenor Carrier MultiPath Switch gives CLECs,
ISPs and other telecommunications entrepreneurs an easy,
cost-effective way to deliver low-cost, high-quality voice
services over IP networks. Advanced features include both IP
Packet and TDM circuit switching, built-in multilingual IVR and
the ability to perform Billing and Least Cost Routing in
association with an external RADIUS based billing server.
Residing in your POP and connected to Tenor
units on customer premises via IP, the Tenor CMS provides a
complete VoIP solution with a MultiPath architecture that allows
you to use both your data network and the public switched
telephone network to provide voice service. By providing greater
assurance of call quality and reliability, this unique capability
makes VoIP services easier for you to sell to today’s risk-averse
customers, easier to customize for individual customer needs and
easier to scale as your business expands.
|
Part
Number |
Product
Description |
Model
Number |
|
501-0089-00 |
Tenor CMS 960 Carrier MultiPath
Switch Base System (a.c. power) Tenor CMS 19"
rack mounting 8 slot chassis with system controller and dual
redundant power supplies. The base system does not include
Line Interface cards, an H.323 gatekeeper, PacketSaver packet
multiplexing, or multiple IVR languages.
These options must be ordered
separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS960
Base System (a.c.) |
|
501-0090-00 |
Tenor CMS 960 Carrier MultiPath
Switch Base System (d.c. power) Tenor CMS 19"
rack mounting 8 slot chassis with system controller and dual
redundant power supplies. The base system does not include
Line Interface cards, an H.323 gatekeeper, PacketSaver packet
multiplexing, or multiple IVR languages.
These options must be ordered
separately.
Power Requirements : -48 Volts d.c.
|
CMS960
Base System (d.c.) |
|
501-0091-00 |
Optional Third a.c. Power Supply
Module for Tenor CMS 960 Optional third power
supply module for Tenor CMS 960 8 slot chassis. Provides additional
load sharing and fully redundant power back-up.
Power Requirements : 100 – 240 Volts a.c.
|
Power
Supply Module (a.c.) |
|
501-0092-00 |
Optional Third d.c. Power Supply
Module for Tenor CMS 960 Optional third power
supply module for Tenor CMS 960 8 slot chassis. Provides additional
load sharing and fully redundant power back-up.
Power Requirements : -48 Volts d.c.
|
Power
Supply Module (d.c.) |
|
|
TOP |
Tenor CMS 960 8/120 Bundled Systems (a.c. power)
|
Tenor CMS 960 8/120 Bundled Systems offer CLECs,
ISPs and other telecommunications entrepreneurs a fully equipped
"starter" system in a convenient bundled form.
The Tenor CMS 960 8/120 Bundled System consists
of the Tenor CMS 960 Base System and a single DS-1 Line Card which
is equipped with one DSP Resource Module. This combination will
support up to 8 T1/E1 spans and up to 120 simultaneous VoIP calls.
The Tenor CMS 960 8/120 PS Bundled System is
identically configured but also includes Quintum’s PacketSaver
packet multiplexing technology which significantly reduces the
amount of IP bandwidth required to support multiple VoIP calls
between two Tenor switches.
|
Part
Number |
Product
Description |
Model
Number |
|
501-0101-00 |
Tenor CMS 960 8/120 Bundled System (a.c.
powered) Consists of the Tenor CMS 960 Base
System, a DS-1 Line Interface Card and one DSP Resource Module.
This bundled system does not
include an H.323 gatekeeper,
PacketSaver packet multiplexing, or multiple IVR languages. These
options must be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS960
8/120 Bundle (a.c.) |
|
501-0102-00 |
Tenor CMS 960 8/120 PS Bundled System
(a.c. powered) Consists of the Tenor CMS 960
Base System, a DS-1 Line Interface Card, one DSP Resource Module
and one PS-120 PacketSaver Option. This bundled system does not
include an H.323 gatekeeper or multiple IVR languages. These
options must be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS960
8/120 PS Bundle (a.c.) |
|
|
TOP |
Tenor CMS 960 8/240 Bundled Systems (a.c. power)
|
Tenor CMS 960 8/240 Bundled Systems offer CLECs,
ISPs and other telecommunications entrepreneurs a fully equipped
"starter" system in a convenient bundled form.
The Tenor CMS 960 8/240 Bundled System consists
of the Tenor CMS 960 Base System and a single DS-1 Line Card which
is equipped with two DSP Resource Modules. This combination will
support up to 8 T1/E1 spans and up to 240 simultaneous VoIP calls.
The Tenor CMS 960 8/240 PS Bundled System is
identically configured but also includes Quintum’s PacketSaver
packet multiplexing technology which significantly reduces the
amount of IP bandwidth required to support multiple VoIP calls
between two Tenor switches.
|
Part
Number |
Product
Description |
Model
Number |
|
501-0097-00 |
Tenor CMS 960 8/240 Bundled System (a.c.
powered) Consists of the Tenor CMS 960 Base
System, a DS-1 Line Interface Card and two DSP Resource Modules.
This bundled system does not
include an H.323 gatekeeper,
PacketSaver packet multiplexing or multiple IVR languages. These
options must be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS960
8/240 Bundle (a.c.) |
|
501-0098-00 |
Tenor CMS 960 8/240 PS Bundled System
(a.c. powered) Consists of the Tenor CMS 960
Base System, a DS-1 Line Interface Card, two DSP Resource Modules
and two PS-120 PacketSaver Options. This bundled system does not
include an H.323 gatekeeper or multiple IVR languages.
These options must be ordered
separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS960
8/240 PS Bundle (a.c.) |
|
|
TOP |
Tenor CMS 960 16/480 Bundled Systems (a.c. power)
|
Tenor CMS 960 16/480 Bundled Systems offer CLECs, ISPs and other
telecommunications entrepreneurs a fully equipped "starter" system
in a convenient bundled form.
The Tenor CMS 960 16/480 Bundled
System consists of the Tenor CMS 960 Base System and a two DS-1
Line Cards which are equipped with two DSP Resource Modules. This
combination will support up to 16 T1/E1 spans and up to 480
simultaneous VoIP calls.
The Tenor CMS 960 16/480 PS Bundled System is identically
configured but also includes Quintum’s PacketSaver packet
multiplexing technology which significantly reduces the amount of
IP bandwidth required to support multiple VoIP calls between two
Tenor switches.
|
Part
Number |
Product
Description |
Model
Number |
|
501-0178-00 |
Tenor CMS 960 16/480 Bundled System (a.c.
powered) Consists of the Tenor CMS 960 Base
System, two DS-1 Line Interface Cards and four DSP Resource
Modules. This bundled system
does not include an H.323
gatekeeper, PacketSaver packet multiplexing or multiple IVR
languages. These options must be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS960 16/480 Bundle (a.c.) |
|
501-0179-00 |
Tenor CMS 960 16/480 PS Bundled
System (a.c. powered) Consists of the Tenor
CMS 960 Base System, two DS-1 Line Interface Cards, four DSP
Resource Modules and four PS-120 PacketSaver Options. This bundled
system does not include an H.323 gatekeeper or multiple IVR
languages. These options must
be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS960 16/480 PS Bundle (a.c.) |
|
|
TOP |
Tenor CMS 960 32/960 Bundled Systems (a.c. power)
|
Tenor CMS 960 32/960 Bundled Systems offer
CLECs, ISPs and other telecommunications entrepreneurs a fully
equipped "starter" system in a convenient bundled form.
The Tenor CMS 960 32/960 Bundled System
consists of the Tenor CMS 960 Base System and four DS-1 Line Cards
which are equipped with two DSP Resource Modules. This combination
will support up to 32 T1/E1 spans and up to 960 simultaneous VoIP
calls.
The Tenor CMS 960 32/960 PS Bundled System is
identically configured but also includes Quintum’s PacketSaver
packet multiplexing technology which significantly reduces the
amount of IP bandwidth required to support multiple VoIP calls
between two Tenor switches.
|
Part
Number |
Product
Description |
Model
Number |
|
501-0180-00 |
Tenor CMS 960 32/960 Bundled System (a.c.
powered) Consists of the Tenor CMS 960 Base
System, four DS-1 Line Interface Cards and eight DSP Resource
Modules. This bundled system
does not include an H.323
gatekeeper, PacketSaver packet multiplexing or multiple IVR
languages. These options must be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS960
32/960 Bundle (a.c.) |
|
501-0181-00 |
Tenor CMS 960 32/960 PS Bundled
System (a.c. powered) Consists of the Tenor
CMS 960 Base System, four DS-1 Line Interface Cards, eight DSP
Resource Modules and eight PS-120 PacketSaver Options. This bundled
system does not include an H.323 gatekeeper or multiple IVR
languages. These options must
be ordered separately.
Power Requirements : 100 – 240 Volts a.c., 50/60 Hz.
|
CMS960
32/960 PS Bundle (a.c.) |
|
|
TOP |
Hardware Options for Tenor CMS240 and CMS960 -
System Controller, DS-1 Interface
Line Card and DSP Resource Module
|
Tenor CMS 240 and CMS 960 Carrier MultiPath
Switches are supplied with Quintum’s DS-1 Line Cards and DSP-120
DSP Resource Modules.
The Tenor CMS (Carrier MultiPath Switch) can be
configured to support from 8 to 32 T1/E1 spans and from 120 to 960
simultaneous VoIP calls using the Tenor CMS DS-1 Line Cards and
Tenor CMS DSP-120 DSP Resource Modules.
Each DS-1 Line Card will support up to 8 DS1
ports. The DS1 ports can be individually configured to support
either T1 or E1 line protocols.
Each DS-1 Line Card may be equipped with either
one or two plug-in DSP-120 DSP Resource Modules. Each DSP Resource
Module will support up to 120 simultaneous VoIP calls.
The Tenor CMS can also be configured as a TDM
circuit switch only with no VoIP capability. When used in this
configuration no DSP resource is required when using T1 or E1 PRI
signaling. A minimum of one DSP Resource Module will be required
when using T1 or E1 channel associated signaling (CAS).
|
Part
Number |
Product
Description |
Model
Number |
|
501-0082-00 |
Tenor CMS DS-1 8 Port T1 / E1 Line
Interface Card T1/E1 line interface card
supports up to eight individually configurable T1/E1 lines via
eight rear mounted RJ-45 connectors. Up to four line cards can be
combined to support up to 32 T1/E1 lines for a maximum of 768 or
960 calls respectively. Each line interface card can accept one or
two DSP Resource plug-in modules, each of which will support up to
120 simultaneous VoIP calls, for a maximum of 240 VoIP calls.
|
CMS DS-1
8 Port T1/E1 Line Interface Card |
|
501-0081-00 |
Tenor CMS DSP-120 120 Port DSP
Resource Module DSP resource module supports
up to 120 simultaneous VoIP calls per module. Up to two DSP modules
can be combined to support up to 240 simultaneous VoIP calls per DS1
T1/E1 Line Interface Card.
Please Note - When using the Tenor CMS as a TDM
circuit switch only, a minimum of one DSP Resource Module is
mandatory when using T1 or E1 Channel Associated Signaling (CAS)
protocols.
|
CMS
DSP-120 120 Port DSP Resource Module |
|
501-0075-00 |
Tenor CMS System Controller Card – (Spare or
Replacement)
Spare or replacement System Controller Card for Tenor CMS240,
Tenor CMS960 and Tenor Call Relay SP.
|
CMS
System Controller Card (Spare or Replacement) |
|
501-0054-00 |
Tenor CMS Blank Panel (Single) – (Spare or
Replacement)
Single module spare or replacement blanking panel for use with
Tenor CMS240, Tenor CMS960 and Tenor Call Relay SP.
|
CMS Blank
Panel (Single) - (Spare or Replacement) |
|
501-0055-00 |
Tenor CMS Blank Panel (Triple) – (Spare or
Replacement)
Triple module spare or replacement blanking panel for use with
Tenor CMS240, Tenor CMS960 and Tenor Call Relay SP.
|
CMS Blank
Panel (Triple) - (Spare or Replacement) |
|
Others Links
Technical specifications are subject to change
without notice.
All brand names and trademarks are the property of their respective
owners. |
TOP |
|
|
|
|
|
