|
|
Classic
Digital Tenor
Products |
Tenor BX
Series - BRI VoIP Switches
|
The Tenor BX Series BRI VoIP switches give
multi-location enterprises and small service providers an easy,
cost-effective way to capitalize on the power of Voice over IP (VoIP).
With its MultiPath architecture, the Tenor connects to the data
network through a 10/100 Ethernet interface and to the enterprise
PBX and public voice network through multiple Basic Rate ISDN (BRI
S/T) interfaces. From this position, the Tenor employs its
patented SelectNet™ technology to monitor calls for jitter, packet
loss, latency and can transparently switch mid-call to the
voice network whenever conditions demand.
|
Part
Number |
Product
Description |
Model Number |
|
501-0157-00 |
Tenor BX204 BRI VoIP Switch
(S/W Upgradeable to BX408)
Four channel VoIP switch with two
BRI S/T ports and one 10/100 Ethernet port. Includes the following
features: VoIP Switch and MultiPath architecture, SelectNet
QoS based auto switching. Supports a network of up to four Tenor
switches without a gatekeeper Supports up to four simultaneous voice
calls over the IP network.
|
BX204 |
|
501-0158-00 |
Tenor BX408 BRI VoIP Switch
(Not S/W Upgradeable)
Eight channel VoIP switch
with four BRI S/T ports and one 10/100 Ethernet port. Includes the
following features: VoIP Switch and MultiPath architecture,
SelectNet QoS based auto switching. Supports a network of up to four
Tenor switches without a gatekeeper. Supports up to eight
simultaneous voice calls over the IP network.
|
BX408 |
|
501-0159-00 |
Tenor BX816 BRI VoIP Switch (Not S/W Upgradeable) Sixteen channel VoIP switch with eight BRI S/T
ports and one 10/100 Ethernet port. Includes the following features:
VoIP Switch and MultiPath architecture, SelectNet QoS based
auto switching. Supports a network of up to four Tenor switches
without a gatekeeper. Supports up to sixteen simultaneous voice
calls over the IP network.
|
BX816 |
|
|
TOP |
Tenor DX Series - Digital VoIP MultiPath Switches
|
The Tenor DX Series digital switches give
multi-location enterprises and small service providers an easy,
cost-effective way to capitalize on the power of Voice over IP (VoIP).
With its MultiPath architecture, the Tenor connects to the data
network through a 10/100 Ethernet interface and to the enterprise
and public voice network through a T1, E1, or PRI interface. From
this position, the Tenor employs its patented SelectNet™
technology to monitor calls for jitter, packet loss, latency,
and can transparently switch mid-call to the voice network
whenever conditions demand.
|
Part
Number |
Product
Description |
Model Number |
|
501-0113-00 |
Tenor DX2008 VoIP MultiPath Switch (Not Software
Upgradeable)
Eight channel VoIP switch with two T1/E1/PRI
ports and one 10/100 Ethernet port. Includes the following features:
MultiPath architecture, SelectNet QoS based auto switching. Supports
a network of up to four Tenor switches without a gatekeeper Supports
up to eight simultaneous voice calls over the IP network.
|
DX2008 |
|
501-0114-00 |
Tenor DX2016 VoIP MultiPath Switch
(Software Upgradeable) Sixteen channel VoIP
switch with two T1/E1/PRI ports and one 10/100Ethernet port.
Includes the following features: MultiPath architecture, SelectNet
QoS based auto switching. Supports a network of up to four Tenor
switches without a gatekeeper. Supports up to sixteen simultaneous
voice calls over the IP network.
|
DX2016 |
|
501-0115-00 |
Tenor DX2024 VoIP MultiPath Switch
(Software Upgradeable) Twenty four channel
VoIP switch with two T1/E1/PRI ports and one 10/100 Ethernet port.
Includes the following features: MultiPath architecture, SelectNet
QoS based auto switching. Supports a network of up to four Tenor
switches without a gatekeeper. Supports up to twenty four
simultaneous voice calls over the IP network.
|
DX2024 |
|
501-0116-00 |
Tenor DX2030 VoIP MultiPath Switch
(Not Software Upgradeable) Thirty channel VoIP
switch with two T1/E1/PRI ports and one 10/100 Ethernet port.
Includes the following features: MultiPath architecture, SelectNet
QoS based switching. Supports a network of up to four Tenor switches
without a gatekeeper. Supports up to thirty simultaneous voice calls
over the IP network.
|
DX2030 |
|
|
TOP |
Tenor DX Series - Digital VoIP MultiPath Switches
|
The Tenor DX Series digital switches give
multi-location enterprises and small service providers an easy,
cost-effective way to capitalize on the power of Voice over IP (VoIP).
With its MultiPath architecture, the Tenor connects to the data
network through a 10/100 Ethernet interface, and to the enterprise
and public voice network through a T1, E1, or PRI interface. From
this position, the Tenor employs its patented SelectNet™
technology to monitor calls for jitter, packet loss, latency
and can transparently switch mid-call to the voice network
whenever conditions demand.
|
Part
Number |
Product
Description |
Model Number |
|
501-0117-00 |
Tenor DX4048 VoIP MultiPath Switch
(Not Software Upgradeable) Forty eight channel
VoIP switch with four T1/E1/PRI ports and one 10/100 Ethernet port.
Includes the following features: MultiPath architecture, SelectNet
QoS based auto switching. Supports a network of up to four Tenor
switches without a gatekeeper Supports up to forty eight
simultaneous voice calls over the IP network.
|
DX4048 |
|
501-0118-00 |
Tenor DX4060 VoIP MultiPath Switch
(Not Software Upgradeable) Sixty channel VoIP
switch with four T1/E1/PRI ports and one 10/100 Ethernet port.
Includes the following features: MultiPath architecture, SelectNet
QoS based auto switching. Supports a network of up to four Tenor
switches without a gatekeeper. Supports up to sixty simultaneous
voice calls over the IP network.
|
DX4060 |
|
501-0119-00 |
Tenor DX6120 VoIP MultiPath Switch
(Not Software Upgradeable) One hundred and
twenty channel VoIP switch with six T1/E1/PRI ports and one 10/100
Ethernet port. Includes the following features: MultiPath
architecture, SelectNet QoS based auto switching. Supports a network
of up to four Tenor switches without a gatekeeper. Supports up to
one hundred and twenty simultaneous voice calls over the IP network.
|
DX6120 |
|
501-0120-00 |
Tenor DX8120 VoIP MultiPath Switch
(Not Software Upgradeable) One hundred and
twenty channel VoIP switch with eight T1/E1/PRI ports and one 10/100
Ethernet port. Includes the following features: MultiPath
architecture, SelectNet QoS based auto switching. Supports a network
of up to four Tenor switches without a gatekeeper. Supports up to
one hundred and twenty simultaneous voice calls over the IP network.
|
DX8120 |
|
|
TOP |
Tenor DX Series - Digital VoIP Gateways
|
The Tenor DX Series digital VoIP gateways give
small service providers an easy, cost-effective way to capitalize
on the power of Voice over IP (VoIP). With its Gateway
architecture, the Tenor connects to the data network through a
10/100 Ethernet interface, and to the enterprise or public voice
network through a T1, E1, or PRI interface. DX Series VoIP
Gateways provide a powerful solution for VoIP trunking
applications.
|
Part
Number |
Product
Description |
Model Number |
|
501-0121-00 |
Tenor DX2048 VoIP Gateway (Not
Software Upgradeable) Forty eight channel VoIP
switch with two T1/E1/PRI ports and one 10/100 Ethernet port.
Supports a network of up to four Tenor switches without a gatekeeper
Supports up to forty eight simultaneous voice calls over the IP
network.
|
DX2048 |
|
501-0122-00 |
Tenor DX2060 VoIP Gateway (Not
Software Upgradeable) Sixty channel VoIP
switch with two T1/E1/PRI ports and one 10/100 Ethernet port.
Supports a network of up to four Tenor switches without a
gatekeeper. Supports up to sixty simultaneous voice calls over the
IP network.
|
DX2060 |
|
501-0123-00 |
Tenor DX4096 VoIP Gateway (Software
Upgradeable) Ninety six channel VoIP switch
with four T1/E1/PRI ports and one 10/100 Ethernet port. Supports a
network of up to four Tenor switches without a gatekeeper. Supports
up to ninety six simultaneous voice calls over the IP network.
|
DX4096 |
|
501-0124-00 |
Tenor DX4120 VoIP Gateway (Not
Software Upgradeable) One hundred and twenty
channel VoIP switch with four T1/E1/PRI ports and one 10/100
Ethernet port. Supports a network of up to four Tenor switches
without a gatekeeper. Supports up to one hundred and twenty
simultaneous voice calls over the IP network.
|
DX4120 |
|
Others Links
Technical specifications are subject to change
without notice.
All brand names and trademarks are the property of their respective
owners. |
TOP |
|
|
|
|
|
